The Pitfalls of a Defective Plumbing System

Homeowners are most often not aware of the signs of a defective plumbing system. Unless a major incident happens like water bursting from the pipes, they do not put much effort and attention to it. The little signs are often what trigger leaks and malfunctioning water connections.

  1. Take the example of a gurgling sound that is heard from somewhere every time you open a kitchen faucet. One would think that it is probably normal and will pass away in time. However, this may be signaling something else.

 

One way to check this is to flush a liter or two of water down the sink. If the sound becomes louder and water overflows from the floor where a drain is also set up, say the laundry area, there definitely is a problem. It might be that the water was blocked from flowing freely because there is something wrong with the way the pipes were installed, especially if they are interconnected.

 

  1. Another sign of a faulty system is bad or sewer-like odor emanating from the bathroom or kitchen sink every time you open the faucet or flush water down the drain. Possible reasons for this are leaks from rotted or cracked drain pipes, a clogged drain, a vent pipe that is too short, or a dry trap.

 

  1. Did you notice that your water in the bathtub has turned yellowish or brownish? This might be the consequence of decaying or corroded pipes.

 

  1. Minor leaks should never be disregarded, especially if it is recurring or appearing at irregular intervals. This is where the big problem usually starts.

There might be DIY or simple remedies that you can turn to for some of the most common plumbing problems. However, these do not guarantee long-term solutions and may only worsen the situation. Hire a plumber to do a total inspection. This will save you time and money, not to mention freeing you from the stress a broken plumbing system brings.

 

By Dez Duran-Lamanilao

 

 


Are Your Plumbing Pipes Worn Out? Here Is How To Find Out

By Arnold Obat

Plumber in Houston, TX

Image Source: Pinterest

Plumbing pipes, just like any other object that is constantly in use can be worn out over a period of time and as such, it’s very important that you inspect them from time to time especially if you are living in an old house.

Before conducting an inspection, make sure that you know exactly what you are doing and what to look for. If you don’t know what to do during the inspection, then you will find this post to be of great value to you as it will show you how to check whether your plumbing pipes are worn out in 4 simple steps.

That said, make sure you get help from a professional plumber if you feel you need an expert’s perspective on your plumbing pipes.

Leaks

The first thing you want to do when doing the inspections is check for any leaks. Leaks, as you already know, tend to be problematic and in most cases, they do end up causing serious damages that require extensive repairs if not looked into.

Checking for leaks is simple all you have to do is simply look out for an accumulation of mildew or molds. In general, these two tend to thrive in moist environments and as such, you are likely going to find them where there is a leak in your home. You can use this method to inspect hard to reach plumbing pipes like ones placed behind a wall or under the floor.

Stains or Warping

In addition to leaks, you can also inspect your home for any worn out plumbing pipes by simply checking for stains. When checking for stains, there are certain areas you need to focus on and they are underneath the sink, in the bathtub, the wall and lastly the ceiling.

If at any point during your inspection you happen to notice a stain, then that simply implies that you have worn out plumbing pipes that need repair. Consider seeking help from a professional plumber if you notice stains or warping in your home.

Corrosion

Checking for corrosions is another trick you can take up when you choose to inspect your home for worn out plumbing pipes. When doing the corrosion inspection there are certain things you should look out for and they are pimples, flaking, discoloration, and dimpling.

If you find any of these, rest assured that there is corrosion and as such, it’s time to replace worn out plumbing pipes. This method can prove to be a bit problematic so feel free to get in touch with a plumber for further details on how to go about it.

Water Discoloration

Water discoloration can help you a lot during the inspection of your home’s plumbing pipes. However, it’s good to point out that it tends to work best after you’ve been out of the house for a while, may be you were on a vacation, or on faucets that haven’t been used for some time.

What are you looking for? Well, you are simply looking for discolored water. If you do find discolored water when you open any faucet in your house, then this an indication that it’s time to change your plumbing pipes.

The discolored water you seeing pouring out from the faucet imply that rust is present in your pipes and thus the water discoloration. In some cases, the rust that accumulates tend to harden the water and as a result end up affecting its taste. This, if not dealt with in good time, can end up resulting in serious health problems for anyone using contaminated water.

As mentioned in the beginning of this post, the work of inspecting plumbing pipes to check whether they are worn out is something that should be done by homeowners on a regular basis. If you happen to come across something that you are unsure of during the inspection, then do contact a professional plumber and let him/her assist you where necessary. Lastly, always ensure that you fix your pipes in good times in order to avoid any serious plumbing pipe problems in future.